temperature measurement face recognition network time attendance access control power supply facial recognition device
*AI Dynamic Face Recognition Infrared Thermal Imaging Thermometer / Face Recognition Body Temperature Detection Integrated / In & Out Intelligent Solution Non-Touch
*Fast In and out
*Abnormal alert
*Face recognition
*Access control
*Infrared thermal imaging fast temperature measurement error as low as + -0.3 degrees
*Binocular biopsy
*Abnormal temperature control
*Real-time voice broadcast
*Speed of recognition <300MS
*Recording speed <500MS
*Distance: 0.3-0.5m for 7inch; 0.3-08 for 8inch.
*Record information in real time
*7/8 Inch IPS HD IP34
| Hardware |
| Chipset | Hi3516DV300 |
| System | Linux operation system |
| RAM | 16G EMMC |
| Image sensor | 1/2.7" CMOS |
| Lens | 4mm |
| Camera Parameters |
| Camera | Binocular camera supports live detection |
| Effective pixel | 2Mega pixel,1920*1080 |
| Min. lux | Color 0.01Lux @F1.2(ICR);B/W 0.001Lux @F1.2 |
| SNR | ≥50db(AGC OFF) |
| WDR | ≥80db |
| Face Recognition |
| Height | 1.2-2.2 M, angle adjustable |
| Distance | 0.5-3 Meters |
| View angle | Vertical ±30 degree |
| Reco. Time | <500ms |
| Temperature |
| Range | 30-45(℃) |
| Accuracy | ±0.3(℃) |
| Distance | 0.3-0.8m |
| Response time | <300ms |
| Interface |
| Internet interface | RJ45 10M/100M Ethernet |
| Weigand port | Support input/output 26 and 34 |
| Alarm output | 1channel relay output |
| USB port | 1USB port (Can be connected to ID identifier) |
| General |
| Power input | DC 12V/3A |
| Power consumption | 20W(MAX) |
| Working temperature | 10℃ ~ +50℃ |
| Humidity | 5~90%, no condense |
| Dimension | 123.5(W) * 84(H) *361.3(L)mm |
| Weight | 2.1 kg |
| Column aperture | 33mm |
Precautions:
- The temperature measuring device should be used in a room with a room
temperature between 10 ℃ -40 ℃. Do not install the temperature measuring
device under the vent, and ensure that there is no heating source within 3
meters;
- Personnel entering the room from a cold outdoor environment will affect the
temperature measurement accuracy. The forehead temperature test should be
performed after the forehead is unobstructed for three minutes and the
temperature is stable;
- The temperature read by the temperature measuring device is the
temperature in the forehead area. When there is water, sweat, oil or thick
makeup on the forehead or the elderly have more wrinkles, the read
temperature will be lower than the actual temperature. Make sure there is no
hair or clothing covering this area.
MJK ELECTRONICS CO., LTD
was established in 2005. Our company is located in shenzhen, China. Our company is a professional Hi-Tech enterprise engaged in all kinds of LCD digital signage displays such as outdoor kiosks,interactive touch kiosks, touch screen table ,wall mounted displays, floor standing displays,, LCD monitor ,videowall, etc. which are the most widely using media in retail, shopping center, restaurant, hotel, bank, building, airport, showroom etc.
We have a professional and precise technical support team, including software development engineer, electronic engineer, construction engineer, who are outstanding in the digital signage. As one of the leading company in digital signage, MJK offers very innovative, stylish, and full-function products, which are welcome by the clients from over fifty countries and areas.
MJK always takes the strict QMS system to control quality for Zero Fault, so as to meet various standards from clients worldwide. Our products acquire CE, FCC, ROHS,3C certifications so far.
Having rich experience in OEM & ODM cooperation, we are capable of offering you factory price with guaranteed quality as well as complete after-sale service. We have and will always try our best to meet every possible demand of our customers.
Product Tags:
|
|
temperature measurement face recognition network time attendance access control power supply facial recognition device Images
|
